Hunt Chat

Hunt Chat (http://www.huntchat.com/index.php)
-   Almost Anything Goes (http://www.huntchat.com/forumdisplay.php?f=37)
-   -   ECT Reamers (http://www.huntchat.com/showthread.php?t=39684)

dunwerkin 04-25-2005 06:16 PM

ECT Reamers
 
I'll put this up here. Maybe I was in the wrong catagory. Does anyone here know anything about ECT reamers? Are they good ..? Bad..?

BILLY D. 04-25-2005 08:35 PM

OK, I'LL GO FIRST.

WHAT THE HECK ARE ECT REAMERS? I'VE NEVER HEARD OF THEM. THIS WILL PROBABLY BITE ME. :eek:

dunwerkin 04-26-2005 09:18 AM

ECT reamers
 
Billy D
ECT Reamers are being sold by Midway USA. I just want to know if they are any good.

Edited: Dunwerkin, I removed your unkind comments. Your question assumes everybody knows what ECT reamers are - and that is a dubious assumption at best. You also posted it in two forums not related to the question or product. So getting upset at a question is out of order.

I doubt you'll get any reply at all now. In light of your rudeness, I won't bother suggesting the correct forum to you.

dunwerkin 04-26-2005 04:52 PM

ect reamers
 
Rocky
I posted that question in good faith that someone on here could tell me if these reamers are worth buying, And Billy D comes on like a wise guy trying to make me look like I don't know what I'm talking about. I didn't apprieciate that, I am serious about the whole shooting game and I thought everyone on here was too. He was out of line and I'm getting hell for it. Only one thing to do. I'll leave this site and let the wise guys have it....... Adios My Friend.

Rocky Raab 04-26-2005 05:13 PM

Billy did nothing of the sort, as would be clear to anyone who actually read his reply. He said, "What is an ECT reamer?"

That's a reasonable question since you posted it in "AAG" - it could refer to anything. But it in no way cast a single aspersion on you.

You were childish as well as rude. Bye.

TreeDoc 04-26-2005 07:45 PM

New name:

dunpostin

BILLY D. 04-26-2005 07:48 PM

HI ROCKY

SORRY ABOUT STARTING A MAJOR CONFLAGRATION ON THE FORUM. BEING THAT THERE WAS A LONG TIME LAPSE AND NO ONE ELSE HAD POSTED AN ANSWER, I MADE THE COMMENT "OK I'LL GO FIRST". I FIGURED EVERYONE ELSE WAS AS CONFUSED AS I WAS. I THOUGHT THE GENTLEMAN WAS REFERING TO A CHAMBER REAMER, BUT I WASN'T SURE. AFTER WORKING AS A GUN PLUMBER FOR SOME TIME I AM COGNIZANT OF MANSON, PACIFIC TOOL AND GUAGE, CLYMERS AND PLACES TO RENT REAMERS, ELK RIDGE AND OTHERS, BUT I HAD NEVER HEARD OF ECT. THAT WAS THE CRUX OF MY QUESTION. I WASN'T TRYING TO BE A SMART A$$. I WAS TRYING TO EXTRACT INFO. I'M SORRY TO DISAPPOINT ANY ONE BUT I'LL BE THE FIRST TO TELL EVERYONE I DON'T KNOW EVERYTHING IN THE WORLD THERE IS TO KNOW.

WHEN I MADE THE COMMENT THAT "THIS WILL PROBABLY BITE ME" I MEANT THAT I THOUGHT THIS WAS A PIECE OF TOOLING I SHOULD BE FAMILIAR WITH, BUT WASN'T.

I TALKED TO A FEW FRIENDS AND SUPPOSEDLY PACIFIC TOOL AND GUAGE MANUFACTURES THE REAMERS FOR MIDWAY AS AN EXPANSION TO PTG'S PRODUCT LINE. MAKES SENSE TO ME, TWO COMPANIES MAKE MONEY IN UNISON. NOW KEEP IN MIND THIS IS ALL GRAPEVINE INFO.

I ALSO TALKED TO MY CO-HORT, COLLEAGUE, FORMER EMPLOYER, AND ADOPTED SON AND ASKED IF HE HAS USED ANY OF THESE IE: ECT REAMERS. HE SAID HE HAD, AND THE QUALITY IS EXCELLANT.

THATS FOR YOUR EDIFICATION ROCKY.

ANY WAY MY APPOLIGIES FOR SCREWING UP YOUR FORUM, IT WAS NOT INTENTIONAL. I'M SORRY THE POSTER WAS SUFFERING A SEVERE CASE OF PMS, HE'S GOTTA LIGHTEN UP A BIT.

BILLY D. 04-26-2005 07:58 PM

ME AGAIN

HEY I LEARNED A NEW WORD TODAY, "ASPERSION". THANK YOU. LIKE GRANDPA ALWAYS SAID, " SON, WHEN YA STOP LEARNING, YA MAY AS WELL GO LAY DOWN ON THE TRAIN TRACKS."

I'M ONLY 68 AND I STILL GOT A WAYS TO GO.

THANKS

Rick R 04-27-2005 08:18 AM

BillyD,
Just a suggestion but you may want to release that "caps lock" key. Some people tend to interpret "CAPS" as yelling. FYI
Rick

fabsroman 04-27-2005 08:56 AM

Rick R.,

You need to look at Billy's signature line for the reason why he uses the caps lock. We have had this issue come up in the past, and I even think we debated allowing him to use all caps a couple of years ago in the mods forum.

If Dunwerking got offended because the post was all in caps, then he didn't read far enough. Plus, there really wasn't much in Billy's initial post to get offended about if someone actually read the entire post and digested it.

Rocky Raab 04-27-2005 09:43 AM

Billy you did absolutely nothing wrong. You've always been a model poster, and you remain so.

In fact, I'll give you another word that describes you: mansuetude.

M.T. Pockets 04-27-2005 10:34 AM

I sure didn't know what a ECT reamer was, thank you for asking the question. I saw nothing at all disrespectful in your response to the original question. If anyone took offense to it they're going to have an awful lot of frustration through out the rest of their life. They're a bit touchy.

I'm glad Rocky caught the response so quickly so it could be edited.

As far as all caps are concerned, I think your explanation why you use all caps is clear enough and needs no further explanation. Please continue to keep posting.

fabsroman 04-27-2005 11:43 AM

Rocky,

You need to stop with the big words because I do not have a dictionary on my desk yet. Then again, I guess I could look it up on the internet somewhere. No time for that though. LOL

Skinny Shooter 04-27-2005 01:04 PM

Quote:

Originally posted by fabsroman
Rocky,

You need to stop with the big words because I do not have a dictionary on my desk yet. Then again, I guess I could look it up on the internet somewhere. No time for that though. LOL

mansuetude
n. sweetness of temper; tameness.

or

SYLLABICATION: manˇsueˇtude
PRONUNCIATION: mnsw-td, -tyd
NOUN: Gentleness of manner; mildness.
ETYMOLOGY: Middle English, from Old French, from Latin mnsutd, from mnsutus, past participle of mnsuscere, to tame : manus, hand; see man-2 in Appendix I + suscere, to accustom; see s(w)e- in Appendix I.


Fabs, I feel much better when I'm not the only one looking up words on-line. :D

fabsroman 04-27-2005 01:08 PM

LOL.

Thanks for posting the definition and pronunciation Skinny. However, I still do not think I could pronounce that word if I had to.


All times are GMT -5. The time now is 03:23 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.