Sendero 25-06 grouping/best load?
 

Got a new Sendero , just broke in . little disappointed in 1-1.25 groups with Rem factory/100grains. At 200 , they looked like buckshot.... I plan on having some loaded though.

If anybody has experience w/ this gun let me know what they have seen w/factory. AND what they recomend to load.
Thanks

I have the same rifle you have and mine likes a load of 54 gr. of IMR 4831 with a Barnes 115 gr. TSX and winchester large rifle primer in a Remington case. This load produces cloverleaf 3 shot groups at 100 yds. when I do my part. I've taken 2 deer with it and both times the bullet performed flawlessly. I'm very happy with the TSX

25-06 loads
 

My 25-06 is a Browning model 78 single shot rather than a Remington. Mine likes 117 gr. Sierras with 51.5 grs. H 4831 with Fed. 215 primers in R-P cases. Of course you know to work the load up yourself. That's the one that works for me with 3/4" 5 shot groups and 1 1/4" 10 shot groups @ 100 yds. MV is 3000+ f/s out of that Browning 26" bbl.

Rev

25-06
 

I have owned 2 - 2506's and both preferred 115 Nosler BT with 52 grains for the Browning Abolt and 54 for the Remington 700. Good luck.