Hunt Chat

Hunt Chat (http://www.huntchat.com/index.php)
-   Reloading Bench (http://www.huntchat.com/forumdisplay.php?f=14)
-   -   primer question (http://www.huntchat.com/showthread.php?t=47554)

DON WALKUP 10-22-2008 04:33 PM

primer question
 
i have some winchester 'small rifle' primers are they the same as CCI 200, 250?

they're for my 22-250 using a speer 40 grain spire soft point.

Rabid Rich 10-22-2008 06:04 PM

Nope Don,
The 22/250 takes large rifle primers.
.
ie, CCI #250's are Large rifle MAGNUM primers.
Best of Luck...........

Jack 10-22-2008 09:02 PM

Small rifle primers are for 222/223 sized rifle cartridges. They'd be the same as CCI 400's.

Rocky Raab 10-23-2008 09:30 AM

As a general rule, always use the exact primer specified in the reloading data manual. Primers vary in both physical dimensions and brisance (explosive potential). Switching them indiscriminately can lead to unexpected results.

That said, if you don't have the primer specified, you can usually use one of a similar type. Match both the size AND the brisance level. Example: substitute CCI 200 large rifle standard for Federal 210 large rifle standard. Likewise a magnum for another magnum.

If you do so, you MUST begin with Start-level loads, and you might or might not safely achieve anything like "book" numbers for either maximum charge or velocity. Changing the primer makes the data a crapshoot.

NEVER substitute primers in a previously worked-up charge/load without going back to Start-level loads.

DON WALKUP 10-27-2008 07:31 PM

cool...got it...thanks guys...


All times are GMT -5. The time now is 05:33 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.