|
Merlin, forget the two chunks. Toss 'em or put 'em away. Use the shellholder for that round instead. Remove the threaded cap, insert the cartridge in the shellholder and lower it into the puller body. Tighten down the screw cap.
Whack it.
If the bullet and powder don't come out in a whack or two, recheck that the threaded cap is tight and whack it again.
When it does drop, spin off the cap, lift out the shellholder and empty case, then dump the powder and bullet out.
I like to dump them into a powder funnel. The powder will sift through, but the bullet won't.
|