ok here is my findings on what i have tried so far - i just left the bench few minutes ago - as far as the gun - its a ruger 77vt mkII stainless 204 caliber-- as far as grading how it shot - i dont know how to do it like a pro so i will use best good fair poor - simple but it get the message across- all were using once shot hornady factory once fired brass and 205m primers-- now 1st load hodgdon 322 -- 27.5 gr with 32gr v max and 2.27 col was fair---- AA2230 -26gr- with 40gr berger and 2.26 col a little better than fair ---- Varget 27.0 gr with 40gr berger and 2.26 col good --- 748 -27gr - 32 gr vmax and 2.30 col poor---- 748 -27gr- 40 berger and 2.26 col was fair - the plan is to use VARGET with 40 gr and play with the col and the powder amount will post back shortly-- i sure hope this helps a few
|