BTW...the gun just may need a very good cleaning. They aren't too hard to take apart. Take the action out of the stock...should be held in by the bolt on the underside of the forend.... Then there is a nut on the back of the receiver that unscrews pretty easily.. heavy spring. then you can drop the bolt out. Clean all the gunk off the bolt and in the bolt and around the bolt..including inside the receiver. put a drop or two of oil on the darn thing and reassemble. May just work ok. Oh clean the shell lifter wires(springs) etc also..no oil there. Put her back in the stock and try her out.. Might just work!! got my fangers crossed for ya. Had to do that to one of mine to get it goin
