|
Bench Modifications
When I built my bench I made some slight modifications. Some quick things you might or might not want to consider. 1st I doubled the length to 10 feet. 1/2 for Metalic and 1/2 for shotshell. 2nd I added a 48" tall hutch to the back. A full length shelf across the top, a 2 foot shelf unit on each end and a 6 foot pegboard in the center. On the bottom of the top shelf I installed a 48" fluorescent light and installed 2 duplex outlets in the pegboard. Right below the discharge chute of my shotshell reloader I drilled a 3" hole in the top with a wide mouth funnel attached to the top of the hole. Below the hole is a rack for a large Acrobin. The shells drop right in. I installed the 6" woodworkers vise on the metalic end, but I changed the jaw material to semi-hard rubber. So far my son and I have been very pleased with the design. Good luck with yours and don't be afraid to make changes to suit YOUR NEEDS.
|