You'll have no problem. Just think it through first. Once you get going it all makes sense.
Does your RUM torque a bunch. Mine seem to want to twist about a quarter turn to the right or is it the left.
and I hold it pretty firmly. This is off of a pedestal rest.
I'm working on an above the bore bipod with a bit of a wide stance hopefully it will help w/looooonnnnngggg range.
With 93 gr of 7828 I'm getting about an average of 3080 FPS MV for 3 shots today But the battery in the chorno was running low and pooped out after tose three shots. The chrono may show them a little slower than they were.
Pressure was around 60000 PSI which may be actually 62000 or so but there were not pressure problems as indicated by primer markings and case extraction.
Accuracy is right around MOA @ 200.