|
Well, I wish I was not so negative too, but I have recieved no replies from knight. My gun dealer has not been able to communicate with them on my behalf. My gun dealer has had trouble getting them to provide parts and service. I believe the problem I attemped to correct is valid. So I'm left with this course of action. My goal for posting this note is to see if others would look to see if the primer nipple on the MK93 threads in far enough to reach the threads in the breach plug, or does it feel like it is threading into the unthreaded portion of the hole. Mine screws into the unthreaded part of the hole, then it bottoms out in about a 1/4 turn, buggering up the threads of the nipple. The gun has been accurate for one shot, then all subsequent shots are bad. It's just plain wrong. I am going hunting for a week starting tomorrow, so I won't be online til after that, but I sure would like to know if this is an isolated incident, or are others having trouble getting the gun to fire accurately. When i replaced the whole breachplug, firing pin with a conversion kit to big primers, all my problems with accuracy went away. the inaccuracy of this gun has cost a couple nice deer.
|