|
I have too agree with the others you have lube dents. The outer neck and shoulder area of the case needs no lube, a touch every couple on the inner lip of the mouth to aid the expander balls movment and you are set. It takes very little to dent a case.
I`d take the die apart and spray with carb cleaner/ bore solvent and very lightly oil with a gun oil. Run a dry cloth over them to remove excess oil before useing them. (no oil on the expander) I oil and dry my dies for storage after use because of a problem with rust on one of them in the past.
__________________
I must confess, I was born at a very early age. --Groucho Marx
|