|
Yes, under that little setscrew is a brass plug, or on some older dies, a lead plug. If the plug gets lost, the setscrew doesn't grab enough to hold.
A very easy substitute is a piece of lead shot- put that in to replace the lost brass or lead plug, adjust dies, screw down the setscrew, and the lead shot mashes into the die threads- problem solved.
__________________
“May we never confuse honest dissent with disloyal subversion.”
Dwight D. Eisenhower
"If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter"
George Washington
Jack@huntchat.com
|