|
Mr 16 if you look back a few threads under tc 54..I posted a problem I was having and included in my problem/fix was the missfire issue. That was one problem I never encountered with the TC in all the years I owned it other than one lend out to a trusted cousin that I warned..do not clean with anything other than the #9 I gave him to use when cleaning it....he didn't listen so I found out when I went to fire it and no spark..he said snuck in gun oil..and some must of gotten on the wrong parts..but if you read under that TC54 post about the mixing of cleaning solvents and the oily/gunk that ended up on the flint after only one or 2 shots that could be a place to look..I now am back to dry patches lubed with #9 only and pan is dry as popcorn stinker after every fire....I also keep my flint at least 1/16 inch from the frizen and an old cva I played with in the past would not spark and found it was a weak spring...not dropping the hammer fast enough to make hot spark..and it was a new gun...can look there also.
__________________
mugrump
|