|
Mr. 16 gauge,
I have made several powder horns out of raw horns.
I go to my shop and scribe the big end of the horn and cut a PLUG out of quarter-inch wood scrap. I put the plug in the vise and use a wood rasp to shape it. I try it time and again in the horn. When fitted to enter with a "Snug" fit, I put wood glue on the plug, insert it in the big end of the horn and put 4 brass screws into the outside perimeter.
After the glue dries, I put a screw-eye adapter into the big end for a leather thong. The other end goes on the small end of the horn. I had no instructions, I just worked it out in my shop.
Adam
__________________
Adam Helmer
|