|
This is the 391 cap and barrel. The cap was rusted, the barrel had, had a choke tube laid on it in the case and the case closed, the choke scratched and gouged about 3 inches of barrel right in front of the gas port / spring area going to the muzzle, to the right in this case.
The cap turned out with a semi gloss finish from the top being sprayed several times as I coated the sides. So, were I to do the barrel again, I would coat it in a 4 point then go right on with a second 4 point while it was still wet.
I called the tec folks and they said this stuff will not stick to itself once it gets tack free, so a second coat must be applied when the first is wet. The cap is how it looks with a wet applied second coat.
Ed
__________________
The three Rs: Respect for self; Respect for others; and responsibility for all your actions.
"Is life so dear, or peace so sweet, as to be purchased at the price of chains and slavery? Forbid it, almighty God! I know not what course others may take, but as for me, give me liberty, or give me death!"
|