![]() |
#4
|
|||
|
|||
Try something in a 150 gr. bullet first. Hornady would be a
good place to start as their factory ammunition is usually not pricey and is typically fairly accurate. That's not to say, though, that it will be accurate in your rifle. If not, try a different brand of ammunition, again, in a 150 gr. offering. You don't need "premium" bullets for deer-hunting with a 30-06, and "premium" ammunition costs a little more, so I'd stick with the less-expensive stuff. If, after trying several different brands, you can't find one that will shoot reasonably well (hopefully capable of putting 3 shots into 1 1/2 in. at 100 yds), you might try a 165 gr. load. These will provide a very suitable load for deer as well, with just a touch more recoil. The sectional densities of the 165s are better than those of the 150s in .30-caliber, so, even though they leave the muzzle a little bit slower than the 150s, they retain their down- range energy a little better than do 150s. If you happen to find a box that shoots particularly well through your rifle, go back to where you bought it and buy 3 or 4 more boxes and you'll be set. Unfortunately, the factories tend to change their recipes over time, so you can't necessarily rely on just buying another box next year, the year after, or whenever you might need it, because they may be using completely different powders/bullets/primers, and will certainly be using different lots of powder/bullet/primer even if they are using the identical combinations. The "new" stuff down the line may not shoot as well. Good luck with that 710! |
|
|