my best loads so far for :

[scooterman27006]

yes this is just a poor attempt to pick your hard earned information out of your log book of your best loads just to keep my press arm from getting overworked but i have a couple loads i will share as well - but keep this in mind - i am far from an expert guess you figured that out if you read my questions on how to go about getting the "best load" lol - ok i know that every gun is completely different and may require its on load but what information that is posted- it may give me and others somewhere start over and may save some powder and copper not that i mind shooting but time is my problem - so the closer i get to what i am looking for the better and i hope some agree with me - like rockie posted before check all stuff before loading your on but i will do my very best to post without a mistake - i will double check it even and hope all will do the same --------- i only have about 3 loads that i would consider putting out there yea pretty sad i know but i sure did a lot of experimenting to get these 3 loads first load is for a ruger #1 in 220swift -- i tried several powders and bullets and this is the best load so far---rel 19 41.5g and i used winchester primers with a 55 gr nosler ballistic tip and wwsuper brass once fired and my col was 2.79 and this would keep them in a quarter at a 100 yrds now i almost chose another load that was close and it was exactly the same except i used w-760 40 gr - i dont remember why the rel19 was better now for the second and i am looking for better because this load was not so great but best of what i played with out of 6 different loads - this was with a contender barrel 24" i believe w-748 24 gr using br4 primers ( i also used winchester primers and they almost done as well) with a 55 gr nosler bt and a 2.3 col------i sure would like to find a better load for this barrel i feel like it should do better now for my last one this load was used in a ruger 77 heavy barrel 243 old gun but sure does shoot- i used imr 4320 35.5 gr and winchester primers with a 80 gr nosler bal tip and winchester brass some once fired some more than once and a 2.730 col now if someone has other great loads for these i sure would like to see it and i have many others that i would like to have a starting load to play with - i have a 204 remington adl 700 to do yet and a 22-250 encore 26" heavy barrel to do --- the 223 and 22-250 i really believe will shoot but i just cant get the right combination for them so if anyone has similiar gun and has a great load i sure would like to give it a try - i have posted this only because i am kinda at a stand still or burned out on trying different stuff - i feel like by now i should have something more accurate than i do but maybe i have the wrong attitude - are there guns out there that will shoot pretty much the same all the time within reason or am i dreaming