12GA rifle From Hell--

[hubel458]

Getting to some more 4ga/bore work.With barrel and
falling block action locked down fired off some blank
type loads to test the breach and firing pin I set up.
I fired it by hitting the back of firing pin with a rod,
as I now have get hammer and trigger setup. Firing pin
dents primers ok, breach works and headspace is ok.

For loads I have wads to take up space above powder.
Others with same 4ga case in doubles fill case about
1/6 full of Blue Dot (110gr), with 2000gr slug.

I'll use 1600 gr hollowbase slugs, with about 1/3 of a case
of IMR 4759 or 1/2 to 5/8 case of RE17, rest filled
with fiber wads.These are shotgun primer loads and I will be
using THE STRONGER PRIMERS OF KILN CASES at about same
price as BMG primers. And I have BMG primer cases also
that I will test also, once gun is finished in a few weeks.Ed