Help & a couple Questions

[Catfish]

Check your funds and see if you can come up with enough money for the 550 Dillon. I`ve been loading on on since the 1980`s and would buy a better press if there was one on the market. I have tool heads set up for a bunch of different round, both rifle and handgun and 2 tool heads set up for a couple of rounds that I want both a FL and neck sizer. I fired alot of groups under 1/2 moa with ammo loaded on it. I will make one more suggestion. If you are going to be loading cast bullets for your handguns get Dillon dies. Wax builds up inside the dies with cast bullets and they have to be cleaned every so often. With Dillon dies there is a snap pin on the top of the die that can be pulled out and the insides of the die pushed out the bottom and cleaned without ever takeing the die out of the press. Over the years I`ve loaded with about every kind of dies on the market, and will still use most, but I`ll only use Dillon for loading large volumes of cast bullets.