Hunt Chat  

Go Back   Hunt Chat > Tools of the Trade > Reloading Bench

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 03-04-2006, 04:31 PM
Evan03 Evan03 is offline
Registered User
 
Join Date: May 2002
Location: Mtn Home Idaho
Posts: 1,847
ive run the bullets through my 220 with good results and will test them through my 22/250 later on the 22/250 is lighter more handy rifle for all around hunting. guess i have cruel intentions in mind.


id start at 38grs of h380 and go from there. this load is well below max and should produce very good results or atleast get you started.

what are your plans for the 53gr tripple shocks. both my 220 and 22/250 may see some use as a medium weight hunting rig. antelope small deer kinda thing.


i just checked and 38grs is about 1.5grs below max, you could start wokring up from as low as 35grs if you wanted with the max being at about 39grs. if you make it much higher than 39grs you may be dealing with compressed loads.
in winchester brass 39.5grs is at 93% of the cases capicity
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:06 AM.


Powered by vBulletin® Version
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.