Firing pin problem?

[BILLY D.]

fabs

sounds like the barrel isn't sitting back in the action far enough, otherwise known as headspace. first insure the barrel is seated where it's supposed to be. i'd also check the bolt for cleanliness. they have a habit of getting dirty in a hurry, and all kinds of strange things happen. take the trigger guard out and visually check the bolt. i always clean my bolt with brake clean, it gets all the crud out and removes the powder residue. then i re- lube it.

if that don't fix the problem i'd take it to a smith and have him look it over.

you may have to get back with the distributor or green mountain and scorch their shorts.

my 10-22 shoots better than i do.

good luck.