Hunt Chat  

Go Back   Hunt Chat > Tools of the Trade > Reloading Bench

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 01-14-2007, 10:49 AM
sambubba sambubba is offline
 
Join Date: Sep 2003
Location: Abilene, Texas
Posts: 12
PO Ackley's book has data for the 6.5x55 Improved Arch which should be exactly what you are looking for. Some of the loads listed in his book for various cartridges are very hot, so you know to start lower and work up. I have two 6.5x55's and one .260AAR, which is the 257 Ackley Improved necked up to 6.5. I am still working up loads for this new rifle, but so far it is getting 3027 fps with the 120 ballistic tip and 2933 with the 129g. The 140 core locked is 2857, which should be close to the top. My 23" rifle has a very long throat, and I am not at max levels yet.
The Arch shows 3140 with the 120, 2890 with the 129 and 2908 with the 140. It has 2-3 grains less capacity than the .260AAR. My 26" bbl. Swede does 3021 with the 120g, 2966 with the 129g and 2900 with the 140g Hornady. As you can see, the difference between the standard and the improved Swede will probably be about 60 fps. in a 23" bbl.
What hasn't been mentioned is greatly reduced case trimming
and having something no one else has.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:14 AM.


Powered by vBulletin® Version
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.