.22 hornet reloading.

[VarmintSniper]

Thank you everyone who posted.

I had a chance to get out this evening with the g/f.

We had to resight it a couple .22's before I could play around with my Hornet.

We shot our Rem 504's, .22's for a while. Man, what a difference in accuracy when I sanded both of our pressure pads down at the end of the stock. Groups shake from 2" down it 1/2". That makes me save around $700 since I was going to order some lilja barrels. Anyways, back to the hornet topic.

We didn't have the best of rest today. I forgot our shooting blanket, so we had to shoot off the tail gate of the truck with one sand back.

I shot 6rds of 12.5gr of lilgun w/35gr vmax.

1st 2 shots were about 12" low. Adjusted the scope and shot 2 more times. About 6"s low and 4" right.

Made correction and shot 1 shot. Dead center, but about 1" low. Adjusted and shot again. Top of the bullseye eye. Good enough.

Drove the truck to 80yds and figured I'd shoot 3 rds. 3" high and about 1/2" group.

Will try to get out tomorrow when I have more light and better rest. Post pic's later today or tomorrow.

So far it looks like the CZ is going to be VERY accurate.