Hunt Chat  

Go Back   Hunt Chat > Tools of the Trade > Reloading Bench

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 09-12-2008, 09:11 PM
dakotah dakotah is offline
 
Join Date: Oct 2006
Location: South Dakota
Posts: 62
I gotta agree in part to Mule Deer in many respects. White tail do not need a 300 Weatherby with a 180 grain bullet to kill them.They die with lesser calibers and with lesser bullets.

I think with the lighter bullets, then the more likely the blowup (higher velocity and often lighter construction). IMO with a high-powered/high-velocity cartridge like the 300 Weatherby, blowup of the bullets on the game is a concern for average hunters like me, especially with light bullets. If I used a 150-gr bullet with that caliber, I think using a preimum bullet would even be very important than it would be with heavier bullets.

What ever bullet you use -- remember the 300 has a lot of power with capacity of very high velocity. It is my belief that bullets are designed for certain velocity ranges. (so choose wisely) The 300 is on the high side of many bullet designs, I think - as far as velocity is concerned. Yet, if you are convinced that you will be able to place a bullet say in the lungs and not have to worry about a running shot or that the deer will be facing you (angling toward you) or facing somewhat in the other direction (angling away) then what the hey -- makes little difference what ever you use. Shoot it in the ribs behind the shoulder (perhaps close to the heart) and the bullet will likely drop the deer like a high school prom dress.

If you think that you might have to take a less than perfect shot, use some thing that can make it through to the vitals and won't damage a lot of good eating. I think the 300 Weatherby is a fine cartrdige. I am willing to bet though that many people in that area of the country will be using a lower velocity round on white tail deer. A bullet that works well in the neighbor's 308 Winchester may not work as well in the 300 due to this 'blow-up' issue.

I have a friend that uses what I consider varmit bullets on prairie deer and antelope. He is 100% successful with his hits/kills. He shoots from a prone position and he is very patient with his shots. He only shoots game in the between the eyes or between the eye-ear area of the head. His favorite two rifles/bullets for such deeds is the 264 Winchester (100 grain bullets) and the 300 Winchester (125 grain bullets). He never worries about bullet blow up and the deer/antelope when hit, drop like that perverbial prom dress. It works for him and it works for others.

(I am not indictaing that I think Mule Deer does this or anything of the kind. So please don't get pissed at me, Mule Deer.)

I know of a local guy who used to use nothing but 125 to130 grain bullets from a 300 Weatherby and thought it killed like lightning. He sold that 300 and now uses a 300/378 Weatherby with 125 to 130 grain bullets. He loves it. In his words."Kills like magic."

Another local guy tells of shooting a white tail with a 50 grain SX bullet out of his 22-250. The bullet penetrated only about one half of an inch behind the deer's ear. It killed the deer - instantly.

The idea of shooting through a meaty portion of the deer (if the situation calls for it) and damaging the least amount of the deer meat (eat up to the hole) yet the bullet traveling into and often through the vitals is not universally held. Some people can always call their shots and they can make up for poorer performance of the caliber bullet combination with expert marksmanship. Good for them, I say.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:19 AM.


Powered by vBulletin® Version
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.