12GA rifle From Hell--

[hubel458]

The long brass 8ga cases have same thick
sides as plastic cases. And there are long
plastic/paper cases out there, but they
are scarce. Thick sides mean a good chamber
fit, so as to minimize case expansion and make sizing
easier. Here is picture 8ga and 10ga fullbore slugs with
locked on basewads that I setup. Wads held on by
screws and slugs hollowbase as well, so to work in
smooth barrels with some accuracy. 8ga is 1100gr.
10ga is 900 gr.Ed

[hubel458]

New super strong 12ga bolt gun just out, Savage 212, taking
over for the 210. You know I did my first 12ga FH in a 210 and
have posted that sometime I'd like to get a thicker walled
reciever built to have more strength and safety.
Well Savage helped us out.

Its reciever is 1.5" diameter, where the 210 was 1.36" dia.
I has a large .900" diameter bolt, where the 210 had regular
110 bolt inside bolt carrier. It has a fitted bolt head like 210
and other Savage 110-116 rifles. Only its bolt head has two lugs
where the 210 had 3 lugs. Its two lugs about 90% strength as
the 210s 3 lugs.Its about 12% stronger lugs than Enfield and
Rugers. Also it appears the bolt raceways are not through the
barrel thread area so about 50% stronger barrel connection.

Price not too bad 500-550. I'll try to find one later to do some
hairy cartridges in. It has a 3" 12ga chamber from factory and
detachable magazine. Probably can have mag and port lengthened
and feed ok, with 3.5" 12ga and the 700H 3.25". More info
as I find out stuff.Picture from auction-e.Thanks to
Bob in OR for info.Ed