any help will help

[Jay Gorski]

hunter, Couple more things, make sure you read the manuals regarding sizing your fired cases, don't want too much headspace or too little for that matter, and don't 'mix' brass, If you do load different brands of brass, shoot them separately, work-up loads using the same brands of brass and lot number If possible. New brass doesn't need to full length sized, contrary to what some say, unless you've got a really tight chamber(match). Size new brass only 1/4 way down the neck, that'll be just fine. Trim your cases to the same length and chamfer the inside of the cases with a few turns and the outside half again as many. If I can do this reloading thing, anybody can. Have fun, and be safe, go for accuracy, not blockbustin' energy. Jay.