|
|
#2
07-05-2005, 11:46 AM
|
|||
|
|||
|
The same bolt will work fine.
I'd suggest you have a gunsmith do the work, unless you have an action wrench and headspace gauges. It's a simple job with the right tools. Basically unscrew the 204 barrel, screw in the 222 barrel and check/adjust the headspace- shouldn't cost a fortune. Only possible thing you might run into is how the 222 barrel fits the barrel channel in the stock you have.
__________________
“May we never confuse honest dissent with disloyal subversion.” Dwight D. Eisenhower "If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter" George Washington Jack@huntchat.com 
|
|
|
Threaded Mode