frustrated with reloading...

[gumpokc]

If you are _not_ using carbide, or titanium nitride dies, you will have to lube inside and out to prevent stuck cases.

Yes the carbide and tit/nitride dies last longer, and are harder, but the reason most people use them, is just because you don't need an interior lube when your using them, still need exterior though.

For myself, i got those dies when i started, so I really cant tell you anything about how you would need to lube the interiors since I have never done it.

Once you get setup, I think you'll find reloading to be worth it, but it does have abit of a learning curve at first.