|
|
|
|
#1
05-14-2008, 11:28 AM
|
|||
|
|||
|
1911A1 roll pin punch
If that is a roll pin holding the ejector in the frame, put a drop of KROIL on it and let it set a day. Kroil creaps into the recesses and will let the pin slip out of the hole with very little punch work. Brownells has the very small punches and I usually buy at least 1/2 dozen at a time. I am hell on small punches. I think the size is 1/32.
|
 |
|
|
Hybrid Mode
