![]() |
|
#1
|
||||
|
||||
I run some pretty hot loads in my .204. But nothing over any published info I can find.
And I always work up to the maximum...and in most of my reloads the max loads have not been the most accurate anyways!!!
__________________
Moderator of "Bush Pilots" Flying to the fun!!! I like to shoot vermin ![]() |
#2
|
|||
|
|||
Quote:
However, take a modern rifle such as the M700 Reminton or Model 70 Winchester which come chambered in some serious magnum rounds and tell me why they cannot shoot the above mentioned cartridges loaded to the same basic pressures as those "modern" magnum rounds? Sadly, data for those modernized loads for those rounds is not available. One can only try and work them up by the seat of their pants which, while possible for an experienced handloader, is definitely not recommended for those just starting out and frankly even highly experienced loads should think twice. I have worked up some very warm loads for my Winchester M70 Featherweight, primarliy a 140 gr. Nosler Ballistic tip at a bit over 2800 FPS. That same load though is too hot in my custom FN Mauser and I'll have to start all over again for that rifle. My hot loads are worked up during the heat of an Arizona summer with temps running anywhere from 100 to 115 degrees. Those loads should be safe during the cooler weather of hunting seasons. it does require checking the sight at the temps of the hunting area though, preferably a few miles from the actual hunt area. Paul B. |
![]() |
|
|