|
Some problems to check, OAL, proper crimp, fouled chamber, bullet material on case mouth. Do use the barrel's chamber as a gauge, out of the gun.
If you are using a taper crimp or profile crimp, the seater should be a seperate die, otherwise you will cut bullet material as the bullet seats and the case mouth is squeezed down. If cast bullets are used, it is imparitive that the seater be seperate or you could get lead / lube buildup in the chamber severe enough to cause a round to fire out of battery.
Ed
__________________
The three Rs: Respect for self; Respect for others; and responsibility for all your actions.
"Is life so dear, or peace so sweet, as to be purchased at the price of chains and slavery? Forbid it, almighty God! I know not what course others may take, but as for me, give me liberty, or give me death!"
|
09-27-2010, 10:29 AM
Hybrid Mode
