Hunt Chat  

Go Back   Hunt Chat > Tools of the Trade > Reloading Bench

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 10-15-2010, 04:33 PM
Jack Jack is offline
Moderator
 
Join Date: Jun 2002
Location: Georgia
Posts: 6,087
Interesting idea, and I'm sure it can be made to work.
Get the seating depth by trying a dummy round in the chamber of your barrel - you'll have to see how much of the shot capsule can protrude from the case mouth. You may not be able to seat the capsule out too far before it contacts the lands.
Use the smallest shot you can get your hands on. I generally use #9. No point in using big shot- you're effective range in a rifled barrel will be 10-15 feet.
As for a powder charge, I would call up Speer and ask them. My guess is that the powder charges recommended for the 38 Special are going to be too high. My guess is that you'll have to seat the capsule fairly deeply in the Super case, and won't have a lot of room left for powder. BTW, high velocity is not something you want in a shot load. I've pattern tested quite a few in 38 Special, 44 Special, and 45 Auto- once the velocity gets much over 1,000 fps, the patterns start to show big holes in the center.
I'm assuming you taper crimp your usual loads. That probably would work on shot capsules, too, if you don't use a heavy crimp.
Let us know how it works out.
__________________
“May we never confuse honest dissent with disloyal subversion.”
Dwight D. Eisenhower
"If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter"
George Washington
Jack@huntchat.com
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:06 PM.


Powered by vBulletin® Version
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.