Wipe-Out Foaming Bore Cleaner

[skeet]

270m Man.. I have a Foul Out too. It works really well but after cleaning the bore it is chemically clean and you have to put some type of grease or oil on the bore. I've been wanting to try the Wipe out stuff. I have an old 270 that needs a good bore cleaning and an older Rem 700 in 6mm. Gonna get some of that wipe out and use each on a bore first then follow up with the other. I will post my results after I do the dirty deed.. The Foul Out deposits the jacket material on the rod down the bore.. I used the foul out on an older pre 64 Model 70 in 243 that just didn't shoot like it used to..after the foul out it shot great again. That is where I learned you had to oil the bore..It started to rust after a few days....just a stain.. and it cleaned right out..

[Skinny Shooter]

Wipe-Out is the best thing since sliced bread.
It doesn't need any other solvents to help it clean.
It'll do the job in one hour or less.
the Accelerator works well also but I really like their newer Patch-Out.
I put either W-out or P-out in the barrel, let it do its work, run a nylon brush through a couple times and then a cleaning jag.
Repeat as needed.

I've found that Hoppes, CR10 and others are just a waste of time and money.