|
|
|
|
#1
06-18-2013, 08:02 AM
|
||||
|
||||
|
This is the 410 barrel, long and up close. Note the pits in the close, right at the front of the block, half way up the barrel. It looks like a line of lettering, but is actually the forend line. The gray look in places is the reflection of the flash, it is Graphite Black, real black.
Ed
__________________
The three Rs: Respect for self; Respect for others; and responsibility for all your actions. "Is life so dear, or peace so sweet, as to be purchased at the price of chains and slavery? Forbid it, almighty God! I know not what course others may take, but as for me, give me liberty, or give me death!" 
|
|
#2
06-18-2013, 08:11 AM
|
||||
|
||||
|
This is the 391 cap and barrel. The cap was rusted, the barrel had, had a choke tube laid on it in the case and the case closed, the choke scratched and gouged about 3 inches of barrel right in front of the gas port / spring area going to the muzzle, to the right in this case.
The cap turned out with a semi gloss finish from the top being sprayed several times as I coated the sides. So, were I to do the barrel again, I would coat it in a 4 point then go right on with a second 4 point while it was still wet. I called the tec folks and they said this stuff will not stick to itself once it gets tack free, so a second coat must be applied when the first is wet. The cap is how it looks with a wet applied second coat. Ed
__________________
The three Rs: Respect for self; Respect for others; and responsibility for all your actions. "Is life so dear, or peace so sweet, as to be purchased at the price of chains and slavery? Forbid it, almighty God! I know not what course others may take, but as for me, give me liberty, or give me death!"
|
 |
|
|
Hybrid Mode
