Brass tumbling traditional vs steel

[skeet]

never used it so...I don't know

[Jack]

Walnut will get the grit and grime off, but it won't make the brass look shiny and new. If the walnut isn't doing it, change to a new batch - any media wears out after a while.
Never used the steel. I'm sure it will make your brass look great, but, for functionality, looks don't matter.
Another alternative is liquid types- Iosso makes one. You dip the brass in and let it sit for a while - don't need a tumbler for that.
I like my brass to look nice and shiny, too, but, as long as the brass is clean, you're good to go.

[Rottweiler]

I have switched over to wet stainless steel tumbling. Held out for a long time but glad I did it. I went with the Midway "frankford arsenal" version. I still use the dry tumbler after the wet for a final shine with NuFinish. All brass looks like new, inside and out even the grimiest mud filled tarnished range scrounge brass you can find.

Came with a sample packet of their cleaner. I'd give it a meh-at best. Dawn dish soap and a sprinkle of some stuff called Lemi-Shine blows the Midway stuff away.

Bite the bullet and get one when funds allow, You won't be disappointed

[Montana Cowboy]

The wet stainless media works great . I use the Thumler's tumbler . One thing I found is that you have to experiment a little bit with the amount of LEMI SHINE you use depending on the hardness of your water . MC

[skeet]

I bought the Frankford Arsenal machine too. Works really well...but found the brass is so clean I have to run it through walnut or corncob with wax in it....or it wants to run hard through the sizing die...even carbide. But I give all brass a spritz of case lube before loading

[captain2k_ca]

Stainless fanboy!!
Dawn dish soap, and a couple drops of Lemi Shine.(too much will tarnish the brass)
And I also walnut tumble with nufinish after.